Step by step installation

Attaching your bike to E-Solo

To secure your bike to E-Solo, first remove your front wheel and attach your bike to the fork holder on E-Solo, attaching it as if it were the wheel it is replacing. Every adaptor is included. Before lifting your bike onto the car, ensure the cranks are securely fastened to the frame using the provided strap.

Positioning on the car

You can mount your bike anywhere, from the windscreen, roof, sunroof, boot, or tonneau cover, as long as the bike faces forward.

Mounting E-Solo to your car

Clean the area where E-Solo will be placed using a cloth and water. Then, position E-Solo with the attached bike onto the car. Once in place, begin pumping the plunger on the side of each vacuum cup. When the colour band on each plunger is no longer visible, E-Solo is securely attached. To secure the rear wheel, mount the rear wheel cradle beneath it, and use the hook and loop straps to secure the wheel.

Vacuum cups explained

How to remove E-Solo

Removing E-Solo from your car

Removing E-Solo from your car is straightforward. While holding your bike, lift the lift tab on each vacuum cup. This will release the vacuum, allowing you to remove the bike with E-Solo attached.

Removing your bike from E-Solo

To detach your bike from E-Solo, unscrew your through axle or undo the quick-release skewer. This will release your bike from E-Solo. Now, you can reattach your front wheel and get ready for your ride!

1 3

Transport your equipment.

1 4