Step by step installation

Placing Piste on your vehicle

Take both Piste mounts with vacuum cups attached and place on the roof of the car width ways. Space the mounts accordingly for the skis/board you’ll attach to Piste. Bare in mind the size of the load when doing this step.

Fixing Piste to your vehicle

Now Piste is positioned appropriately for the load and vehicle we can fix Piste to the car. To do this you will need to pump the plunger on the side of each vacuum cup. Once the yellow band on the side of the plunger disappears, the vacuum cup is secure. Repeat this with all 4 vacuum cups.

Placing your skis/board on Piste

Release the upper arm of Piste by pressing the button at one end. You can then lift the arm up and place your skis/board on Piste. When resting it needs tobalanced evenly between the two Piste mounts. Your board should be facing forwards and in the direction of travel of the vehicle.

Fixing your skis/board to Piste

Fixing your skis/board to Piste. Now that your board is in place on Piste it is time to secure it. Simply pull down the upper arm and lock in place. This should have a firm click to tightly secure your skis/board. There should be no movement between the skis/board and Piste. Use the provided key to ensure your skis/board are locked in place

How to remove Piste

Remove your skis/board

Press the button on the upper arm on each mount to release your skis/board, you can then lift your gear off of Piste.

Remove Piste

lift the lift tab on each of the vacuum cups. This will release the vacuum and allow you to remove Piste from your vehicle

1 3

Transport your equipment.

View all
1 4
View all